Archived
This forum has been archived. Please start a new discussion on GitHub.
A errir by building the chat demo
sorry for the question. It's quite simple. But i really cann't find the solution.
Questoin:
I have setted the "config\Make.rules.mak" and "config\build.properties". The path for "#ICE_HOME = C:\Ice-3.3.1-VC90", "#jgoodies.forms = C:/Ice-3.3.1-ThirdParty-VC90/lib/forms-1.2.0.jar", "jgoodies.looks = C:/Ice-3.3.1-ThirdParty-VC90/lib/looks-2.1.4.jar" totally right.
But when i run "c:\ChatDemo-1.2.1>nmake /f makefile.mak", it always show the error ".\config\make.commen.rules.mak(112) : fatal error U1050: unable to find a valid Ice distribution, please verify ICE_HOME is properly configured and Ice is correctly installed"
I have runed other demos like "print" ..... sucessfully
Questoin:
I have setted the "config\Make.rules.mak" and "config\build.properties". The path for "#ICE_HOME = C:\Ice-3.3.1-VC90", "#jgoodies.forms = C:/Ice-3.3.1-ThirdParty-VC90/lib/forms-1.2.0.jar", "jgoodies.looks = C:/Ice-3.3.1-ThirdParty-VC90/lib/looks-2.1.4.jar" totally right.
But when i run "c:\ChatDemo-1.2.1>nmake /f makefile.mak", it always show the error ".\config\make.commen.rules.mak(112) : fatal error U1050: unable to find a valid Ice distribution, please verify ICE_HOME is properly configured and Ice is correctly installed"
I have runed other demos like "print" ..... sucessfully
0
Comments
-
Hi Zhenjia,
What windows version and visual studio are you using?0 -
Hello Jose
i have tried in 2 pc.
Windows XP professional, version 2002, service pack3
MS VS2008 Version 9.0.21022.8rtm,
MS .NET Framework Version 3.5 SP1
Windows XP home edition, version 2002, service pack2
MS VS2008 Version 9.0.21022.8rtm,
MS .NET Framework Version 3.5 SP10 -
You need to set ICE_HOME
you can set ICE_HOME in config/Make.rules.mak. removing the comment on the corresponding line.#ICE_HOME = C:\Ice-3.3.1-VC90
it should beICE_HOME = C:\Ice-3.3.1-VC90
Or alternatively you could set it on the command lineset ICE_HOME=C:\Ice-3.3.1-VC90
Let us know if you have more troubles with that
Regards,
José0 -
Muchas gracias, Jose
It works now. I am really sorry that i didn't notice the "#".
Question:
But there are other errors now.
It show:
"The command "cl.exe" is either not found or written faulse.
NMAKE: fatal error U1077: 'cl.exe' : return code '0x1'
Stop.
NMAKE: fatal error U1077: 'for' : return code '0x1'
Stop."
BUT,
after i have copied the "cl.exe" in to c:\ChatDemo-1.2.1 and added the path into VS, it still shows this error by running "namke /f makefile.mak"0 -
after i have copied the "cl.exe" in to c:\ChatDemo-1.2.1 and added the path into VS, it still shows this error by running "namke /f makefile.mak"
I think the problem is that you are using windows command prompt ? you should use visual studio command prompt from Visual Studio Tools menu.
You doesn't need to copy any file or set paths in Vs0 -
Hallo Jose
thank you veeeeeeery much for the always fast answers.
i can complie the files now.
But still have 2 problemes.
i wanna ask the 1. question at first.
After sucessful compilation(D:\ChatDemo-1.2.1>nmake /f makefile.mak), i cann't install it (D:\ChatDemo-1.2.1>nmake /f makefile.mak install)....
The Error is:
copy.\certs\zeroc_ca_cert.pem \ChatDemo-1.2.1\certs
the file cannt copy itself
already copied 0 file
NMAKE: fatal error U1077:"copy": the answer-code "0x1"
Stop.0 -
Hi Zhenjia,
The problem is that you are trying to install and build in the same directory, this isn't supported. Try to install it to a different directory.
You could edit the prefix variable in config/Make.rules.mak to change the installation directory.
Cheers,
José0 -
hallo Jose
after installation , i can run the chatserver. But i cannt run the glacier2 router. when i use "glacier2router --Ice.Config=config.glacier2router" in ".../config", it warns, "glacier2router" is not a command
thanks a lot
zhenjia0 -
Hi,
Seems that you have build the Java client without using progruard if you look to java instruccions it say:The application can be found in the file lib\ChatDemoGUI.jar. If you built this JAR file using ProGuard, it is completely self- contained and has no external dependencies, in which case you can start the client with the following command: > java -jar lib\ChatDemoGUI.jar If you compiled the client without ProGuard, you will need to add Ice.jar, ChatDemoGUI.jar, and the JGoodies libraries to your CLASSPATH. You can start the client with this command: > java ChatDemoGUI.MainView
So you should configure your CLASSPATH as explained or rebuild the java client with proguard in your classpath so the self contained jar could be created.
Hope this help,
José0 -
Thanks Jose
but i still have another problem
after installation , i can run the chatserver. But i cannt run the glacier2 router. when i use "glacier2router --Ice.Config=config.glacier2router" in ".../config", it warns, "glacier2router" is not a command
thanks a lot
zhenjia0 -
Hi,
You need to put Ice bin dir in your PATH, glacier2router command is included with Ice binary distribution.
Cheers,
José0 -
sorry Jose
the glacier2router works now. But there is now problem with chatserver.
it says,
"chaserverservice caught unhandled exception: ObjectAdapterI.cpp:774 :Ice ::InitializationException:
initialization exception:
object adapter 'ChatServer' requires configuration
"
i suppose , i should change somthing in /config/config.chatserver. But i dont know what i am supposed to do.
sorry Jose. I dont wanna make u mad. I think , sometimes, my problem is, i have read the most related articles. But i think i cannt really understand them. When the problem comes, i cannt find the answers, althouth they are in the articls and i have read them. I really appreciate for your patience and time. thank you very much .0 -
Seems that the command you are using to start chatserver isn't correct.
trychatserver --Ice.Config=config.chatserver
Note that Ice.Config should be property spell, with property case, the name of Ice properties passed on command line are case sensitive
Cheers,
José0 -
Hello Jose,
thanks for the answers.
could u give me some suggestions
1. Is it possible to make the installation to a exe file?
2. What has the installation here done actually?
3. Is it possible to pack Chaterserver ,glacier2 router and one java client to one exe file?
thanks a lot
zhenjia0 -
I'm not sure i understand your questions1. Is it possible to make the installation to a exe file?2. What has the installation here done actually?3. Is it possible to pack Chaterserver ,glacier2 router and one java client to one exe file?
I could give you better advice if you clarify a bit what are you trying to do.
Cheers,
José0 -
Sorry Jose
i still dont really understand the problem of java client
1. What's the difference between /client/applet and /client/java?
sorry , i dont know java well
2. I have added the ProGuard to Classpath, comfirmed JGoodies libraries in config\build.properties and added JGoodies libraries in Classpath. I have compiled seperately in client/java and client/applet with "nmake /f makefile.mak".
The Problem is when i try to run the java client, it still doesnt work. It warns: "failed to load main-class manifest attribute from lib\ChatDemoGUI.jar" and "could not find the main class: ChatdemoGUI.MainView"0 -
Hi1. What's the difference between /client/applet and /client/java?
sorry , i dont know java well
Applets are Java applications that run inside a web browser, that is the applet client. Java client is a desktop application that use Swing the graphic Java toolkit. So both are java applications the applet run inside the browser the other is a normal desktop application developed with Java language.2. I have added the ProGuard to Classpath, comfirmed JGoodies libraries in config\build.properties and added JGoodies libraries in Classpath. I have compiled seperately in client/java and client/applet with "nmake /f makefile.mak".
Looking at the output of your command prompt seems that you don' t have proguard correctly installed.
If you build with proguard in your CLASSPATH you should see something likepro-jar: Building jar: C:\ChatDemo-1.2.1\lib\ChatDemoGUItemp.jar Updating jar: C:\ChatDemo-1.2.1\lib\ChatDemoGUItemp.jar Updating jar: C:\ChatDemo-1.2.1\lib\ChatDemoGUItemp.jar Deleting: C:\ChatDemo-1.2.1\lib\chatdemogui.mf ProGuard, version 4.4 Reading input... Reading program jar [C:\ChatDemo-1.2.1\lib\ChatDemoGUItemp.jar] Reading program jar [C:\Ice-3.3.1-VC90\lib\Ice.jar] (filtered) Reading program jar [C:\Ice-3.3.1-ThirdParty-VC90\lib\looks-2.1.4.jar] (filtered ) Reading program jar [C:\Ice-3.3.1-ThirdParty-VC90\lib\forms-1.2.0.jar] (filtered ) Reading library jar [C:\Program Files\Java\jdk1.6.0_17\jre\lib\rt.jar] Reading library jar [C:\Program Files\Java\jdk1.6.0_17\jre\lib\jsse.jar] Initializing... Note: IceInternal.BasicStream: can't find dynamically referenced class org.apach e.tools.bzip2.CBZip2InputStream Note: IceInternal.BasicStream: can't find dynamically referenced class org.apach e.tools.bzip2.CBZip2OutputStream Note: the configuration keeps the entry point 'IceInternal.Selector { void add(I ceInternal.SelectorHandler,IceInternal.SocketStatus); }', but not the descriptor class 'IceInternal.SelectorHandler' Note: the configuration keeps the entry point 'IceInternal.Selector { void updat e(IceInternal.SelectorHandler,IceInternal.SocketStatus); }', but not the descrip tor class 'IceInternal.SelectorHandler' Note: there were 2 unkept descriptor classes in kept class members. You should consider explicitly keeping the mentioned classes (using '-keep'). Note: there were 2 unresolved dynamic references to classes or interfaces. You should check if you need to specify additional program jars. Ignoring unused library classes... Original number of library classes: 17184 Final number of library classes: 843 Shrinking... Removing unused program classes and class elements... Original number of program classes: 1735 Final number of program classes: 1734 Inlining subroutines... Preverifying... Writing output... Preparing output jar [C:\ChatDemo-1.2.1\lib\ChatDemoGUI.jar] Copying resources from program jar [C:\ChatDemo-1.2.1\lib\ChatDemoGUItemp.jar] Copying resources from program jar [C:\Ice-3.3.1-VC90\lib\Ice.jar] (filtered) Copying resources from program jar [C:\Ice-3.3.1-ThirdParty-VC90\lib\looks-2.1 .4.jar] (filtered) Copying resources from program jar [C:\Ice-3.3.1-ThirdParty-VC90\lib\forms-1.2 .0.jar] (filtered) Deleting: C:\ChatDemo-1.2.1\lib\ChatDemoGUItemp.jar all: BUILD SUCCESSFUL Total time: 14 seconds C:\ChatDemo-1.2.1\client\java>
You could run the normal jar following the instructions in INSTALL.WINDOWS
Cheers,
José0 -
Hello Jose,
thanks for the answer.
1. "add ProGuard to your CLASSPATH."
It means, copy the "D:\proguard4.4\lib" into CLASSPATH?
2."The JGoodies libraries must either be present in your CLASSPATH or..."
It means, copy the "D:\Ice-3.3.1-ThirdParty-VC90\lib" into the CLASSPATH?
actually i have tried both with proguard or without.....
when i try without proguard, it warns "could not find the main class: ChatDemoGUI.MainView"
sorry for that, good night
my CLASSPATH is
\proguard4.4\lib;D:\apache-ant-1.8.0RC1\lib;D:\Program Files\Java\jdk1.6.0_18\lib\tools.jar;D:\Program Files\Java\jdk1.6.0_18\lib;D:\Program Files\Java\jdk1.6.0_18\jre\lib;D:\Program Files\Java\jdk1.6.0_18\jre\lib\rt.jar;D:\Ice-3.3.1-VC90\lib;D:\ChatDemo2-1.2.1\lib;D:\Ice-3.3.1-ThirdParty-VC90\lib;D:\proguard4.4\lib\proguard.jar0 -
1. "add ProGuard to your CLASSPATH."
It means, copy the "D:\proguard4.4\lib" into CLASSPATH?
No, it means to add proguard.jar to your CLASSPATH enviroment variable.set CLASSPATH=D:\proguard4.4\lib\proguard.jar;%CLASSPATH%
2."The JGoodies libraries must either be present in your CLASSPATH or..."
It means, copy the "D:\Ice-3.3.1-ThirdParty-VC90\lib" into the CLASSPATH?
No, that means to add both jars to your CLASSPATH environment variable.set CLASSPATH=D:\Ice-3.3.1-ThirdParty-VC90\lib\forms-1.2.0.jar;D:\Ice-3.3.1-ThirdParty-VC90\lib\looks-2.1.4.jar;%CLASSPATH%
actually i have tried both with proguard or without.....
when i try without proguard, it warns "could not find the main class: ChatDemoGUI.MainView"
That is because ChatDemoGUI.jar isn't on your CLASSPATH and java couldn't find the MainView class to start the application, note that add ChatDemoGUI.jar to Java CLASSPATH is only necessary to run the non proguard jar.
If you want to develop Java applications you need to get familiarized with CLASSPATH as is something basic, this article will give you a better understanding of CLASSPATH
Cheers,
José0 -
Hello Jose,
thanks very much for the answers and the link. Thank you so much.
Everything works good now.
You have asked u dont understand what i am going to do.
Actually i would like to pack the "chat server" ,"glacier2 router" and "a java gui (client)" in one exe file and make the other client for the sensor in a exe file.
Could you please give me some advices , when u have time.
thanks very much
zhenjia0 -
Hi
I think that the deployment configuration you show will be not possible, and even if possible it will add some headaches to your project deploy.
I think a simpler deployment configuration is to deploy glacier2router, and chatserver as services, and have the services configured to be started by the operating system.
Then you could have each client as a separate executable.
For c++ applications using Ice you need to install the Ice dlls used by the application, in java you could use proguard to build a self contained jar.
If you need a c++ application that is self contained, you could build it with IceE (IceE supports static linkage, Ice do not support static linkage)
José0 -
Thanks a lot Jose,
1.
Is it right to add the "chat demo client in cpp" files into a win32 project and compile?
I have added the "D:\Ice-3.3.1-VC90\bin" "D:\Ice-3.3.1-ThirdParty-VC90\bin" to the VS "Executable files".
"D:\Ice-3.3.1-VC90\lib" and "D:\Ice-3.3.1-ThirdParty-VC90\lib" into "VS libraries files"
"D:\Ice-3.3.1-VC90\include" and "D:\Ice-3.3.1-ThirdParty-VC90\include" into"VS include files"
But they cannt find some classes and they dont search for the head files.
2. or people can just use VS IDE with IceE?
3. or i change the ICE_HOME to \IceE-1.3.0 and compile?
sorry for that
zhenjia0 -
Hi1.
Is it right to add the "chat demo client in cpp" files into a win32 project and compile?
I have added the "D:\Ice-3.3.1-VC90\bin" "D:\Ice-3.3.1-ThirdParty-VC90\bin" to the VS "Executable files".
"D:\Ice-3.3.1-VC90\lib" and "D:\Ice-3.3.1-ThirdParty-VC90\lib" into "VS libraries files"
"D:\Ice-3.3.1-VC90\include" and "D:\Ice-3.3.1-ThirdParty-VC90\include" into"VS include files"
But they cannt find some classes and they dont search for the head files.
Not that isn't enough, you also need to add slice files to the project, if you are using Ice Visual Studio Plugin, the slice compilation will be handle by the extension, if not you need to provide a custom build step so Visual Studio knows how to build slice files, we encourage Ice visual studio users to use visual studio extensions to build they projects.2. or people can just use VS IDE with IceE?
You can use Visual Studio to build Ice and IceE projects, but you should configure the project correctly. (note that Ice Visual Studio Extension currently does not support IceE)
The best is to take the demos that comes with Ice or IceE as an example and build your own projects from here.3. or i change the ICE_HOME to \IceE-1.3.0 and compile?
The cpp chat demo client in ChatDemo distribution is not expected to work with IceE, if you want to build and IceE project is better to take a look at the demos that comes with IceE distribution and use them as a start point for your IceE application.
Cheers,
José0 -
Hello Jose
i have installed the Ice Visual Studio Plugin and added the ".c" , ".h" files from "chat demo, cpp client" into a "exe" project in Visual C. I think, i just need to combine the "client.cpp" and the File for Initialisation of "exe window". It still doesnt work rightly. But is it a right direction?
By the way, i have noticed, some demos doesn't work in Win xp home edition , just in Win xp professional edition. But that's no problem
THanks soooo much
Zhenjia0 -
You need to enable the Ice Visual Studio Extension for your project and add slice files to your project. The usage is explained here
You could be also interested in Ice Visual Studio Extension screencast, it shows how to use the Ice Visual Studio extension.
Bests,
José0 -
Hi Jose
i have seen the vido shortly. Thank you very much!!! Actually i have setted the Ice Configuratoin as the link shows. I will see the video tomorrow to see if i have done everything right
Have just seen u here before 10 min. If u are in the place in your profil, then we have the same time. its really late now.
Thanks so much
:-)0